Truck Condition as shipped, according to Solectria records-Nominal Voltage-228, Chargers BC1000(2),

1. Charger. All 3 trucks have receptecles for Magne chargers. I have 1 wall mounted Magne charger, that will not fit the truck receptecle. The power lines going to the rear battery pack would indicate dual battery packs, as the output terminates in 2 Anderson connectors.

2. Power steering motor and controllers. #1-Model 20-228, 12 v motor; #2-Model 20-228, 96 v motor; #3-Model 20-144, No motor

3. Battery packs- #1, 228 volts ; #2-228 volts ; #3-228 volts

4. Controllers- AC 230. All are listed as 216V, for motor ACgt20. Of the 6 controllers, 4 have an additional 15 pin connector. Also, these 4 do not have a 3/8" sheetmetal flange, which indicates a different design generation. #1-S/N-517,588;#2-S/N-519,565;#3-S/N-1125 & ?

5. Speed sensor - #3 - Speed sensor on drive shaft. It could be that this was installed later.

6. Potbox-active electronics in cables- #1 No Pot box and cables ; #2 Pot box with additional electronics; #3 Pot box, no additional electronics.

7. Unknown e-box. #1 -additional plastic box;#1 -additional plastic box;#1 -No additional plastic box;

8. Driver side seat belts missing. #1-Yes; #2-OK; #3-OK ; The checkout of the ignition circuit indicates to fasten seat belt.

9. DC/DC converters. #1,#2,#3-380 Watt , 228 Volts;